MUCAR BT200/BT200 Pro OBD2 Bluetooth Diagnostic Tool Full System Diagnose Oil SAS 15 Reset OBD 2 Scanner for All Car Code Reader

Why You Need MUCAR BT200/BT200 Pro?

Mucar BT200 Code Readers & Scan Tools supports Full OBD2/EOBD Test Modes on ENG (Engine System), Reads & Clears codes on All System Diagnosis, and the Live Data Stream in a graph for these ALL systems is available. It is the first bluetooth car scanner with FULL SYSTERM DIAGNOSIS & Multi Resets less than 100 Dollars.

Same Functions of MUCAR BT200 and MUCAR BT200 Pro

Full Systems Diagnosis Lifetime Free for All Cars

Full OBD2 Functions Lifetime Free for All Cars

Difference Between MUCAR BT200 and MUCAR BT200 Pro:
BT200 2 Resets Services(OIL/SAS) All Cars 1 Year Free

BT200 Pro 15 Resets Services All Cars 1 Year Free

After 1 year each reset $19.95/year, total 15 reset $60/year from this store

What are the Same Function and Difference of MUCAR BT200 and Mucar BT200 Pro?

All Cars Lifetime Free Full System Diagnosis

Mucar BT200 diagnostic tool can access all available system modules and read ECU information to facilitate the vehicle diagnosis such as Engine, ABS, SRS, Transmission, TPMS, SAS, BMS, Steering, EPB, Chassis, Air Conditioning, etc. Some commonly used systems as follows:

Check Engine System:BT200 Bluetooth diagnostic tool will read the fault codes, find the cause of the check engine light and point out the problems. This car scanner can show you the live data stream in a graph.

Diagnose ABS System: BT200 diagnostic scanner checks all ABS to retrieve DTCs, views the live data, and offers you specific info of pending codes.

Read SRS System: The BT200 code scanner reads the SRS information, detects existing problems to prompt a certain replacement or repair in time to ensure driving safety.

Transmission System: This car Bluetooth diagnostic tool reads diagnostic codes from the transmission system and detects whether the car’s speed and load match its transmission’s power output.

Tire Pressure Monitoring System: Identify whether the ID information stored in the electronic control unit is consistent with the tire pressure sensor ID to achieve communication and ensure vehicle safety.

How to Distinguish the MUCAR BT200 Pro from MUCAR BT200?

1.
From the Package, BT200 Proversion on the side written label “MUCAR BT200 Pro”.

2 . From Reset Free: BT200 Pro version15 resets 1 year free, while MUCAR BT200 only Oil SAS 2 reset 1 year free.

BT200 All Cars 1 Year Free 2 Resets Service(OIL/SAS)
BT200 Pro Version All Cars 1 Year Free 15 Resets Service, after 1 year 15 reset $60/year.

(OIL/SAS/Brake/BAT, DPF/TPMS/IMMO/ABS/Sunroof /Suspension/Gearbox /AFS /Injector Coding/Throttle Adaptation/Gear Learning Reset)

Support 12 Languages:

English, French, Spanish, German, Russian, Italian, Portuguese, Polish, Turkish, Greek,Traditional Chinese

No need to set the language, the product APP automatically switches with the mobile phone language.

Support Mobile Phone&Tablet Computer

MUCAR APP FreeBluetooth Android:5.0 or above IOS:9.0 or above

MUCAR BT200 OBD2 Diagnostic Tool is suitable for Mobile phones, tablet computer that meet the above version information. When the adapter is connected to the car, you only need to detect and diagnose your vehicle through the mobile phone’s Bluetooth 4.2 and APP. It is suitable for most DIY car owners and maintenance and repair car stores on the market.

MUCAR BT200/BT200 Pro is a portable and economical car fault diagnosis tool, suitable for DIY individual users and small repair shops.

BT200 All Cars 1 Year Free 2 Resets Service(OIL/SAS), BT200 Pro All Cars 1 Year Free 15 Resets Service.

MUCAR BT200 and Bt200 Pro support 15 reset maintenance functions, after 1 year each reset $19.95/year on the MUCAR App, Buy in this store 15 resets total only $40/year. Softwares Link:

1.Oil Lamp Reset Service : allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.
2.EPB service: it is important in the maintenance of electronic braking system’s safety and efficiency.
3.BAT battery service : allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
4.DPF service : specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
5.SAS service: helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
6.TPMS service : makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.
7.IMMO Key Programming: the unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.
8.ABS Bleeding : ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system
9.Sunroof Reset: The sunroof memory generally needs to be reset when the vehicle’s battery is replaced or the car dies.
10.Suspension Reset:Try reset electronic suspension air ride with the massage system close all doors koeo flip through measage system go to suspension reset or on off .
11.Gearbox Reset:Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programing method of the TCU / ECU drive the car.
12.AFS Headlamp Reset ：’AFS’ means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don’t turn when you turn the steering wheel .
13.Injector Coding ：Leaking injectors and some dead injectors can be missed even when an injector is disabled. Otherproblems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off.
14.Throttle Adaptation The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount ofair entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow.
sensorcommunicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair
15.Gear Learning: The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

How to use MUCAR BT200/BT200 Pro

1) Download and install the APK ”MUCAR” in Google Play or your smartphone and sign up for a new account And log in.
2) Activate the device in APK ”MUCAR”, binding serial number;
3) Plug the MUCAR BT200 dongle into the vehicle’s 16pin OBD2 Data Link Connector and then turn on your vehicle.
4) Tap Me/Setting button of your device to bluetooth pair the MUCAR BT200 with your device.
5) Start to diagnose your car.

Support 98% Vehicle Compatibility, 120+ Car Brands

MUCAR BT200/Bt200 Pro is compatible with most American, European, and Asian models manufactured as from 1996. It supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). If you don’t know your car OBD2 protocols that you could check your car OBD2 connector whether 16 Pin. If yes. This goods support to your car.

1.American Car list:
Need standard obd2 and release year from 1996-now
Chrysler, Ford, GM, Jeep, Lincoln, Buick, Cadillac, Chevrolet, Dodge, HM, ect…
2.European car list:
Need standard obd2 and release year from 2000-now
Mercedes Benz, Smart, Sprinter, BMW, Volkswagen, Skoda, Audi, Opel, Lamborghini, Porsche, Maybach, Ford, Land Rover, Jaguar, Aston Martin, Bentley, Rolls-Royce, Rover, Mini, Vauxhall, DR, Ferrari, Fiat, Abarth, Lancia, Alfa Romeo, Maserati, Bugatti, Peugeot, Citroen, Renault, Saab, Volvo, GM, GMSA, Dacia ,Seat, ect …
3. Japanese / Korean car list:
Need standard obd2 and release year from 2008-now
Honda, Acura, Toyota, Scion, Lexus, Mazda, Nissan, Infiniti, Isuzu, Daihatsu, Suzuki, Mitsubishi, Subaru, Samsung, Daewoo, Hyundai , Kia, ect …
4. Chinese car list:
Need standard obd2 , and release year from 2014 -now
Great Wall, Huachen, DF Honda ,Lifan, ect …

Warm Tips!!!

IOS does not support the following brands, for these car brandmust use Andriod phone:

Fiat (Brazil), GM (Brazil), Changan, GWM, Changhe, Soueast, BYD, Foton, Hafei, Haima, Brilliance, Mahindra (India), Maruti (India), Tata (India), Iveco,JAC/JAC Refine, Gonow, Jinlong, KARRY_TY, Lifan, SGMW/United, Pakistan, LUFENG, Maxus, Chery, Qoros, VAZ, Zotye, ZX Auto, Nissan (Zhengzhou)

Full OBDII/EOBD Functions

* Data Stream: This option retrieves and displays live data and parameters from the vehicle’s ECU.

* I/M Readiness: An important part of a vehicle’s OBD II system is the Readiness Monitors, which are indicators used to find out if all of the emissions components have been evaluated by the OBD II system.

* Display Freeze Frame: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer.

* Read Codes: This option is used to identify which part of the Engine emission control system has malfunctioned.

* Clear Codes: After reading the retrieved codes from the vehicle and certain repairing, you can use this function to erase the codes from the vehicle. Before performing this function, please make sure the vehicle’s ignition key is in the ON position with the engine off.

* O2 Sensor Test: The results of O2 sensor test are not live values but instead the results of the ECU’s last O2 sensor test. Not all test values are applicable to all vehicles, not all vehicles support the Oxygen Sensors screen.

* On-board monitor Test: This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.

* EVAP System Test: The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. The tool does not perform the leak test, but signals to vehicle’s on-board computer to initiate the test. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.

* Vehicle Information: This option displays the vehicle information, such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number).

* Turn off MIL (Malfunction Indicator Lights)

More Functions

Diagnostic report
4-in-1 live data stream
Auto VIN
One-click free update
oneline feedback

Live Data Stream

Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

Print Diagnostic Report

1.Generate diagnostic report in MUCAR APP
2.Download the diagnosis report and transfer it to the computer to print the diagnosis report
3.Share your diagnosis report with your partner or car owner

Package lists

1*MUCAR BT200 or BT200 Pro Connector
1*Carrying Bag
1*Muiti-Language User Manual